Smart Lighting Trial Project
STREETLIGHTS in the centre of Adelaide have been fitted with smart technology as it moves closer to its goal of becoming the world’s first carbon neutral city.
City of Adelaide partnered with tech giant Cisco and lighting specialist Sensity to modify more than 60 lights along Pirie Street and Hindmarsh Square in the heart of the CBD.
The Smart LED lighting pilot provided an opportunity to trial new and innovate smart technologies to enable more convenient greater efficiencies in on-demand smart lighting and energy conservation. Effective lighting is critical to all modern cities as they provide the ability to find key points of interest, including events, retail opportunities, etc., within a safe and inviting setting.
The lighting trial was expected to increase energy efficiency and provide insights into maintenance.
The project aims were to:
- Smart LED lights will allow us to monitor on a light-by-light basis the energy consumption of each of the street lights.
- Ensure a safe environment for the public through real-time monitoring of street lights with automated fault detection alerts and programmable remote controls. It will manage the brightness of the street lights, and can automatically adjust based on periods of inactivity.
Pilot Project Results:
- Results are still being analysed and will be updated once ready.
How it ran
The trial was divided into two phases with each lasting for approximately 2.5 weeks.
Trial 1: Movement-activated Light Dimming Function Trial
- Similar to the conventional lighting previously operating at this location, the LED lights were programmed to switch ON and OFF 15 minutes before the Sunset and after Sunrise official times.
- Lights were dimmed to a safe pre-determined lower ambient lighting level if movement sensors don’t detect any pedestrians and/or traffic movement on the road or footpath.
- As soon as any movement from activity is detected, the system resumes its normal lighting levels for the duration of the activity, and a few minutes afterwards.
- The dimming function resumes until movement and activity is again detected.
Trial 2: Movement-activated Light Dimming and Harvesting Functions Trial
- In addition to Trial 1 above, an additional feature was set which monitored any ambient lighting from other sources such as shop-front lighting and temporary festival lighting.
- When significant additional light was present in the vicinity of the LED light, the LED would automatically dim to reduce the light produced by the LED by an amount corresponding to the additional vicinity light to create additional energy savings.
After the trial period, normal lighting operations has resumed without dimming the lights.
Sixty Smart LED lights have been installed across different locations in Pirie Street and Hindmarsh Square.
Benefits to Council, to City, Community including impact on carbon reduction and alignment to the carbon neutral strategy:
- The LED lights produce significant energy saving compared to the conventional lighting
- The LEDs are virtually maintenance-free, requiring only minimal monitoring by maintenance staff, producing additional financial and labour savings;
- It will manage the brightness of the street lights, and can automatically adjust based on periods of inactivity
- The energy savings due to the dimming function accumulate over the full operating period to produce additional energy savings
- Smart LED lighting has the potential to provide the benefits of traditional lighting whilst reducing operating costs, energy usage and carbon emissions that will help ACC achieve the outcomes of its carbon neutral strategy
- It also has the potential to provide different lighting textures that caters to different events on a needs basis
- The Real-time monitoring of street lights with automated fault detection alerts and programmable remote controls will enable quick turnaround times in terms of maintenance
If the trial is a success, the council will consider rolling the lights out in more areas across the City.
The Smart Lighting pilot was supported by City of Adelaide in partnership with iiNet, Cisco and its global ecosystem partner, Sensity.
For more information on the pilot project email email@example.com or phone +61 8 8203 7201.
What’s going on?
ACC have installed new Smart LED Street lights in two sections of the City as part of their ongoing Smart Cities Pilot Projects announced in Feb/March 2015 (based on the MoU with State Govt and Cisco).
What are Smart LED Lights?
Smart LED lights are an innovative new approach to street lighting that contain sensors that communicate back to ACC on things like energy consumption, maintenance requirements and can be programmed.
The Smart LED lights installed have the ability to be dimmed based on the time of day and activity on the street.
Where are they installed?
The lights are installed along Pirie Street and around Hindmarsh Square.
The installation works happened at night to minimise customer impact.
Why are we trialling Smart LED lights?
The data collected from the Smart LED Pilot Project will help inform our approach to future street light replacement and also provide data to ensure the efficient and effective use and maintenance of the street lights.
Are these the new LEDs for Adelaide?
No, they’re a prototype only intended for use during the pilot project.
How long is the Pilot Project?
The pilot will be running for 5 weeks in total starting on May 2, 2016 and will finish on June 13, 2016. The pilot will be divided into 2 different trials with each trial lasting 2.5 weeks.
Are those cameras on the new lights?
Yes, there are two small video sensors attached to some of the new Smart Lights. The sensors can be used for some of the Smart Parking trials that are currently being considered by council.
How is the energy consumption reduction measured?
The Smart Lighting project includes a web based interface that shows the actual energy consumption (kWh) per light.